Part Number: 300-348-419

The standard model 1.3kW with a 48 Volt Stator and DC Rectifiers, without mast or electronics: $3985.00 CAD + taxes.

For 12 or 24 Volt Stator add $485.00 CAD + taxes.

• 62 foot Tower, 4" sch.40 standard pipe in three sections c/w guy lines, turnbuckles, shackles, base plate,  70 feet of #8 power cord for 12 volt output and #10 cord for 24 or 48 volt, from turbine to base c/w detailed installation instructions.

  Please call for a quote as prices will vary depending on the site location.

Part Number: 300-348-421

Double 2.6kW with standard 48 Volt Stators and DC Rectifiers, without electronics $8475.00 CAD + taxes.

For 12 or 24 Volt Double Stators add $970.00 CAD + taxes.

• This includes the 14 foot steel connector between the two turbines, bringing the height  to 76 feet. This setup can also use the same 62 foot tower as the single unit.

P/N 013-000-0480

3kW with standard 48 Volt AC Stator and DC Rectifier, without mast or electronics: $8975.00 CAD + taxes.

P/N 013-000-30

3kW with 300 Volt Stator wired for the Windy-Boy inverter system for direct grid-tie in: $9975.00 CAD + taxes.

P/N 013-000-024

3kW with a 24 Volt AC optional stator and DC Rectifier, without mast or electronics $9975.00 CAD + taxes.

• Max. Output: 3.0 kW @ 16.6 m/sec. or 60 km/hr or 38 miles/hr.
• Furling Wind Speed: 15 m/sec.
• Power Start-up Speed: 2.7 m/sec.
• Blade Diameter: 4 meters or 13 feet. Power coefficient is 0.49.
• Blade Tip Speed Ratio (TSR): 8
• Blade Material: Reinforced fiberglass with UV protection.
• Hub Lubricant: SKF LGWA2 grease.
• Lubrication Interval: 5 years.
• Warranty on Bearings, Frame, Bushings & Slip Ring: 5 years.
• Warranty on Blades: 2 years.